Enviro pHAT

Enviro pHAT for Raspberry Pi

Enviro pHAT packs 4 different sensors in one product, so it is perfect for your Raspberry Pi projects with sensors. The Enviro pHAT allows you to MEASURE up to 10 different variables:

• temperature;
• pressure;
• colour;
• light level;
• 3-axis motion
• compass heading;
• analog inputs

The Enviro pHAT is the right choice to monitor environmental conditions of your house, garage, office, boat or anywhere. You can remotely monitor any place, from wherever you are by just setting up a web server with Flask. Immagine you work in another city, with this product you may know from home if it’s cold/hot, if the pressure is high/low, and how to dress according to the environmental conditions of your office.

The Enviro pHAT works with all of the 40-pin Raspberry Pi board variants, so with Raspberry Pi 4, 3, 2, B+, A+ and zero. If the Enviro pHAT is combined with the Raspberry Zero series, the final product will be super-tiny, which is a quite nice thing.

Enviro pHAT Features:

• BMP280 temperature/pressure sensor
• TCS3472 light and RGB colour sensor
• Two LEDs for illumination
• LSM303D accelerometer/magnetometer sensor
• ADS1015 4-channel 3.3v, analog to digital sensor (ADC)
• Compatible with all Raspberry Pi that have a 40-pin header (RPI 4, 3, 2, 1, B+, B, A+, e Zero)
• Enviro pHAT pinout
• Python Library
• Both ADC male header and female header need soldering

Enviro pHAT Kit includes:

• Assembled Enviro pHAT PCB
• 2×20 0.1″ female GPIO header
• Male header for ADC pins

If you combine the Enviro pHAT with other HATs and pHATs you will discover a lot of possibilities to use it and have fun with it.

Some of the Enviro pHAT combinations could be:

• to display the sensor values on an Unicorn pHAT;
• to use a Display-O-Tron HAT to display the sensor data;
• display a graph of the sensor’s values with Scroll pHAT.

Note: the Enviro pHAT requires soldering on the headers, so a good competence at soldering is required.

Pimoroni Name: Enviro pHAT [PIM181]