RTL-SDR V3 Receiver USB-C (female)

RTL-SDR Blog V3 Receiver USB-C (female)

The RTL-SDR Blog V3 is widely regarded as one of the best RTL-SDR receivers on the market thanks to its excellent price-to-performance ratio.

Questo ricevitore radio è la classica versione 3 ma aggiornata con connettore USB-C femmina. The receiver is based on the R860 (R820T2) tuner and includes several features such as a 1 PPM temperature-compensated oscillator (TCXO), SMA female connector, aluminum enclosure with passive cooling, software-switchable bias tee circuit for powering LNAs and active antennas, additional ESD protection, a redesigned low-noise PCB, and built-in direct sampling for basic HF reception.

The original “RTL-SDR Blog V3” SDR, using the RTL2832U ADC chip, offers a tuning range from 500 kHz up to 1.7 GHz, with up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). HF reception below 24 MHz is available in direct sampling mode, with reduced performance. To enable HF reception below 24 MHz, refer to the V3 feature guide.

Note: RTL-SDR dongles are receive-only (RX).

RTL-SDR Blog V3 works with free software such as SDR#, HDSDR, SDR-Radio, GQRX, the popular SDR++, and SDR Touch on Android. It is compatible with Windows, macOS, Linux, Android, and platforms like Raspberry Pi.

If you don’t have a cable to connect the receiver to your PC, you can use a USB-C to USB-A cable (1 meter) for greater flexibility in positioning and use.

By purchasing this product, you will receive an original RTL-SDR Blog V3 radio receiver with a USB-C female connector. The dipole antenna kit is sold separately. If you are looking for other versions, you can find them here: RTL-SDR Blog V3, RTL-SDR Blog V4, RTL-SDR Blog V4 (USB-C).

RTL-SDR BLOG name: RTL-SDR Blog V3 R860 (R820T2) RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only) (USB-C female)