Zero2Go Omini – wide input range, multi-channel

25,55€

Only 1 left in stock

1
SKU: PIL-312 Categories: , , , , Tag: Brand: Manufacturer code: ZERO2GO_OMINIEAN: 0769894020340Package dimensions: 1 × 12 × 8 cm Package weight: 15 g
support-buddy
email-icon Do you have any further questions?
Send us a message! Ref:PIL-312, Zero2Go Omini - wide input range, multi-channel

ZERO2GO OMINI: wide input range, multi-channel, for Raspberry Pi

Zero2Go is the ideal expansion board – tiny and smart – for powering all Raspberry Pi models with a 40-pin header, including the Raspberry Pi Zero series.

Description of Zero2Go Omini

Zero2Go is an expansion board which, thanks to its pHAT form factor, is the perfect expansion for a Raspberry Pi. This board, which is as small as a Raspberry Pi Zero, provides a wide input range (i.e. a broad range of power inputs) for all Raspberry Pi models with a 40-pin GPIO header: 4B, 3B+, 3B, 3A, 2B, A+, B+, Zero W and Zero.

Zero2Go Omini is part of the Zero2Go family and is also compatible with the Raspberry Pi 4; however, as the current version of wiringPi in the operating system is currently 2.50, you will first need to manually update it to 2.52. It is highly likely that the new version will be officially released very soon. In any case, updating the current version is extremely easy; you simply need to run the two commands below:

wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb

Zero2Go Omini features:

  • Multi-channel: Three separate input channels (each accepting 3.5–28V DC).
  • Automatic step-up or step-down to 5V output to power the Raspberry Pi (i.e. it automatically increases or decreases the output to power the RPI).
  • Automatically switches the input channel (the one with the highest voltage takes precedence).
  • The ability to switch the Raspberry Pi on or off with a single tap of the switch.
  • Completely cuts the power supply to the Raspberry Pi and all its USB peripherals after a shutdown.
  • It is possible, by holding the switch down a little longer, to force a power cut if the operating system (OS) is unresponsive.
  • You can monitor the input voltage on each channel via software.
  • It switches off the Raspberry Pi when the input voltage drops below a preset threshold.
  • It switches the Raspberry Pi back on when the input voltage rises above a preset threshold.

This product offers a fairly wide input range (3.5V–28V); consequently, Zero2Go gives you the ability to power your Raspberry Pi in a wide variety of ways, via a power bank, a solar panel, a Li-Po battery pack, a car battery or even other types of adaptors. It can even be configured as a UPS. If you’re interested, you can consult the user manual for further details.

Please note: bear in mind that Zero2Go Omini will not charge the connected battery. This means you may need an external charging circuit, such as those shown below.

How Zero2Go Omini works

The figure below will help you understand how Zero2Go works and its most important features with a very simple diagram. Zero2Go is capable of automatically switching between step-up mode (voltage-boosting) and step-down mode (voltage-reducing): when Vin drops below 5.5V, the step-up engine will be used; conversely, when Vin rises to 5.5V or above, the step-down engine will be used.

How to install the Zero2Go Omini software

By running this simple command in your home directory, you can easily install the Zero2Go software:

pi@raspberrypi ~ $ wget http://www.uugear.com/repo/Zero2GoOmini/installZero2Go.sh

Your Raspberry Pi will download the script from the website (obviously, your Raspberry Pi must be connected to the Internet) and the “installZero2Go.sh” script will appear in your home directory. Then, simply use `sudo` to run this script:

pi@raspberrypi ~ $ sudo sh installZero2Go.sh

This script will copy a file to “/etc/init.d/zero2go_daemon” and register it so that it runs after boot.

Conflict with the 1-Wire interface
A pin conflict will occur if the 1-Wire interface is enabled without specifying the GPIO pin, as GPIO-4 will be used by default. The conflict arises because Zero2Go Omini receives the shutdown command via GPIO-4. If GPIO-4 is also assigned to the 1-Wire interface, the Zero2Go software will accidentally receive a shutdown command. Therefore, if you find that your Raspberry Pi consistently shuts down on its own after installing the Zero2Go software, it is highly likely that this is due to a conflict with the 1-Wire interface.

Obviously, if this happens, you won’t be able to log in to your Raspberry Pi because it will probably shut down before you even have a chance to log in. If and when this happens, remove the micro-SD card from your Raspberry Pi and, using a card reader, access its file system. Now all you need to do is edit the config.txt file in the “boot” volume and change the GPIO pin used by the 1-Wire interface. If you do not need the 1-Wire interface, you can even disable it temporarily.

To carry out both of these operations, look for something like “dtoverlay=w1-gpio” in the file.

If you want the 1-Wire interface to use GPIO pin 18, simply change “dtoverlay=w1-gpio” to:

dtoverlay=w1-gpio,gpiopin=18

Conversely, if you want to disable the 1-Wire interface, simply turn the line into a comment:

#dtoverlay=w1-gpio

Now save the file, remove your micro SD card from the card reader and reinsert it into your Raspberry Pi. It should now boot up as normal.

Every Zero2Go Omini pack contains:

  • 1 x Zero2Go board
  • 4 x 4mm plastic spacers
  • 4 x M2.5 x 10mm plastic screws
  • 4 x M2.5 plastic bolts

Please note: The Raspberry Pi and the 40-pin header are not included in the pack. You can find them via the following links: Raspberry Pi, Header. If used with the Raspberry Pi Zero, there is no need to use a header.

Zero Omini technical specifications:

  • Dimensions: 65x30x7.7mm
  • Weight: 12g (net weight)
  • Main chips used:
    ^ MCU: ATtiny841 (ATtiny841 Datasheet)
    ^ DC-DC Buck: MP4462 (MP4462 Datasheet)
    ^ DC-DC Boost: SDB628 (SDB628 Datasheet)
  • LED indicator: Three-colour LEDs (red, green and blue)
  • Interfaces:
    ^ Micro USB female connector for input channel A.
    ^ XH2.54-2P connector for input channel B.
    ^ Universal wire connector for input channel C.
    ^ 20×2 header (h=2mm) for connecting the Raspberry Pi.
  • Input: Three separate channels (A, B, and C). Each accepts DC 3.5V–28V (using 5.5~7.0V is not recommended because the DC-DC buck converter requires a greater dropout voltage to operate correctly)
  • Output: 5V output (±5%), maximum 2A
  • Efficiency:
    ^ Up to 87% @ step-up mode
    ^ Up to 82% @ step-down mode
  • Standby current:
    ^ ~0.13mA @ Vin=3.5V
    ^ ~0.36mA @ Vin=12V
    ^ ~0.87mA @ Vin=28V
  • Operating temperature: -30℃~80℃ (-22°F~176°F)
  • Storage temperature: -40℃~85℃ (-40°F~185°F)
  • Humidity: 0~80%RH, non-condensing

User Manual
You can find further details in the User Manual for Zero2Go Omini.

Reviews

There are no reviews yet.

Show only reviews in English ()

Be the first to review “Zero2Go Omini – wide input range, multi-channel”

Stay up to date

Receive news, offers and updates about new PiLover products.