Display Adapter Cable – Length 200 mm

Raspberry Pi 5 Display Adapter Cable – Length 200 mm

The Raspberry Pi 5 board features two MIPI connectors that can be used with displays (DSI) or camera modules. Since these connectors are smaller than those on previous Raspberry Pi models, one of these adapter cables is required to use the Raspberry Pi touchscreen display.

Depending on your project, you may need a longer or shorter cable. This official Raspberry Pi cable is available in three different lengths: 200 mm, 300 mm, or 500 mm. By purchasing this product, you will receive a “Raspberry Pi 5 DSI display adapter cable, 200 mm long”.

DSI display cables are NOT compatible with camera modules, and vice versa. Therefore, they are not interchangeable! Make sure to purchase the correct cable for your intended use..

These display adapter cables feature a 22-pin connector with 0.5 mm pitch on one end (to connect to the Raspberry Pi 5) and a 15-pin connector with 1 mm pitch on the other end (to connect to your display). Each display cable is clearly labeled with “DISPLAY” on the cable body for easy identification and to distinguish it from camera module cables (which are labeled “CAMERA”).

Features:

• Display adapter cable for Raspberry Pi 5
• For use only with DSI displays (not compatible with camera modules)
• 22-pin (0.5 mm pitch) to 15-pin (1 mm pitch) connection
• FPC (flexible printed circuit) cable
• “DISPLAY” marking printed on the cable for easy identification
• Length: 200 mm

Package Contents:

• 1 x Cavo adattatore display per Raspberry Pi 5 lungo 200 mm

Note: Raspberry Pi and display not included.