Capacitive fingerprint sensor

26,29€

In stock

1
SKU: PIL-529 Categories: , , , Brand: Manufacturer code: ADA4750Package dimensions: 10 × 7 × 1 cm Package weight: 4 g
support-buddy
email-icon Do you have any further questions?
Send us a message! Ref:PIL-529, Capacitive fingerprint sensor

Circular fingerprint sensor

If you wish to secure your project using biometrics, this tiny optical fingerprint sensor will make it extremely easy to add fingerprint detection and verification.

This sensor is circular and extremely thin, and has a plastic casing that can be glued or surface-mounted to any enclosure or surface. Furthermore, it has built-in blue LEDs that illuminate the outer casing when the sensor is awaiting a fingerprint.

This type of device is generally used in safes, as it contains a high-powered DSP (digital signal processor) chip that handles image rendering, calculations, feature extraction (fingerprint characteristics) and matching. You can connect it to any microcontroller or system with a TTL serial interface and send data packets to take photos, capture fingerprints, generate hashes and perform searches. Furthermore, you can directly store fingerprints in the integrated FLASH memory, up to 80 fingerprints.

This sensor is supplied with a 6-pin Molex-style connector (1 mm pitch), with colour-coded wires.

You can access both the Arduino library for the fingerprint sensor and the CircuitPython library for the fingerprint sensor to get the sensor up and running in 10 minutes. You can access the tutorial for this product to learn how to wire it up and interface with the UART pins (the link is below, amongst the product’s technical details).

Thanks to this sensor’s pin-out, you’ll be able to connect it to your microcontroller. Furthermore, this sensor uses the 57,600 baud standard (unlike its previous versions, which were set to 115,200 baud), so you may need to update the examples to 115,200 baud for the sensor to respond (so do try both).

Wire colour code:

  • Capacitive reading
  • Black to GND
  • Yellow to Microcontroller TX (data output from the microcontroller)
  • Green to Microcontroller RX (data input to the microcontroller)
  • Red to 3.3 V VIN
  • White to IRQ (can be left disconnected)
  • Blue to 3.3 V VCC (may be left unconnected)

Technical details

Adafruit name: Ultra-Slim Round Fingerprint Sensor and 6-pin Cable

Reviews

There are no reviews yet.

Show only reviews in English ()

Be the first to review “Capacitive fingerprint sensor”

Stay up to date

Receive news, offers and updates about new PiLover products.