AGS02MA I2C TVOC Gas Sensor
The AGS02MA is a MOX-based TVOC sensor equipped with a miniature ADC chip that converts readings to I2C for output of gas resistance and parts per billion (ppb). This resistance can be correlated with total volatile organic compounds (TVOC) – the higher the ppb reading, the more organic compounds are present in the air. It is a simple sensor that performs no additional filtering or calculations, but it is also inexpensive and compact!
Note: this sensor operates at 20 KHz I2C, which is lower than that of many chipsets! This sensor has been successfully tested on RP2040, ESP32 and ATmega328 (UNO) processors. However, it does not work with other chips (e.g. SAMD21 and SAMD51), as they do not support a 20 KHz clock frequency. Before purchasing and testing this sensor, you must check that your board can handle 20 kHz using an oscilloscope or a logic analyser. It will not work at 100 kHz or 400 kHz.
Two 10K pull-up resistors are also required to connect it to the I2C bus, but it will operate at either 3V or 5V, so no level shifting is required.
To get started, you can access the Arduino library – AGS02MA and the CircuitPython code – AGS02MA.
AGS02MA I2C TVOC Gas Sensor Specifications
- Operating voltage: 3.3V~5.5V DC
- Operating current: 28 ± 5 mA
- Sampling period: ≥2s
- Warm-up time: ≥120s
- Operating temperature: 0~50°C
- Operating humidity: 0~95% RH
- Service life: >>5 years (@ 25 °C, clean air)
- Output mode: I2C peripheral mode (≤30 kHz)
- Semiconductor sensor
- Measurement range: 0~99,999 ppb
- Standard test gas: ethanol
- AGS02MA Datasheet
Adafruit name: AGS02MA I2C TVOC Gas Sensor [ADA5593]


























Reviews
There are no reviews yet.