RFID/NFC Leather Keychain Fob

4,85€

In stock

1
SKU: PIL-332 Categories: , Brand: Manufacturer code: ADA1482EAN: 0704256792305Package dimensions: 12 × 5 × 1 cm Package weight: 9 g
support-buddy
email-icon Do you have any further questions?
Send us a message! Ref:PIL-332, RFID/NFC Leather Keychain Fob

13.56MHz ‘MiFare Classic’ RFID/NFC Leather Keychain Fob – 1KB

This MiFare Classic key fob, although small and easy to carry, contains an NXP S50 chip and an antenna. It can be powered passively from a distance of a couple of inches and is ideally suited for use with electronic locks or numerous other systems, such as customer identification.

This key fob can be read by almost any 13.56MHz RFID/NFC reader. As there are various decoding readers available, such as FeLica, you must ensure that the reader you own is capable of handling the tags used by MiFare. Tests carried out show that this product works perfectly with both the PN532 NFC/RFID breakout board and Adafruit’s NFC/RFID shields for Arduino.

RFID/NFC keychain fob features:

  • It is possible to write to these chips.
  • They can store a large amount of data (up to 1KB) in their EEPROM memory, divided into different blocks.
  • You can rewrite them more than 100,000 times.
  • If you wish to read or write data to the EEPROM inside the RFID/NFC tag, we recommend using a compatible reader/writer.
  • To identify and distinguish one tag from another, the solution is a permanent 4-byte ID (which cannot be changed) embedded in the chip.

MiFare Classic uses the traditional NFC S50 chipset. Since 2014, this classic chipset has no longer been supported by the NFC Forum. Consequently, the latest mobile phones and tablets no longer support this type of chip. However, this is irrelevant unless you wish to use this RFID tag with mobile phones or tablets.

S50 chip details:

  • 1 kilobyte (8 kilobits) of non-volatile EEPROM memory.
  • Built-in 48-bit key encryption system.
  • Unique 4-byte identifier embedded in the chip.
  • Frequency: 13.56 MHz.

RFID/NFC Keychain Fob tag details:

  • 3.839×3.839×0.504 cm / 1.51″x1.51″x 0.2″
  • 8,68g
  • Works at a distance of approximately 2″ from the reader

Download the S50 DATASHEET for operating specifications.

Adafruit name: 13.56MHz RFID/NFC Leather Keychain Fob – Classic 1K [ADA1482]

Reviews

There are no reviews yet.

Show only reviews in English (0)

Be the first to review “RFID/NFC Leather Keychain Fob”

Stay up to date

Receive news, offers and updates about new PiLover products.