Warehouse in Italy 
Quality and Passion 
When will it be back in stock? 
Do you have further questions?
Did you find an error?Raspberry Pi Zero 2 W
The Raspberry Pi Zero 2 W is the latest board in the Raspberry Pi Zero family and retains the same form factor, connectors, and mounting holes as the Zero W. The Zero 2 W features a quad-core processor capable of delivering a 40% increase in single-thread performance and up to 5× higher multi-threaded performance compared to the previous single-core Raspberry Pi Zero W!
More specifically, the performance improvement of the Pi Zero 2 W comes from its quad-core 64-bit Arm Cortex-A53 processor running at 1GHz. At its core, it uses a Raspberry Pi RP3A0 System-in-Package (SiP), integrating a Broadcom BCM2710A1 die with 512MB of LPDDR2 SDRAM. This new architecture provides a significant performance boost. In addition, the SiP design greatly improves thermal efficiency by keeping DRAM and CPU within a single package. The previous Package-on-Package (PoP) design, where RAM and processor were separate thermally, has been replaced. This thermal advantage allows for theoretical overclocking up to 1.2GHz (with appropriate cooling).
The Zero 2 W continues to offer 2.4GHz 802.11 b/g/n wireless LAN and Bluetooth (now 4.2), along with Bluetooth Low Energy (BLE) support and modular compliance certification. It is powered via a micro-USB port and requires a 5V 2.5A power supply, just like previous generations.
The Raspberry Pi Zero 2 is equipped with a MicroSD card slot for the Raspberry Pi OS, a CSI-2 camera connector, a USB On-The-Go (OTG) port, and an unpopulated footprint for a 40-pin GPIO header compatible with HATs. Video output is provided via a mini HDMI port; composite video output is available via test pads on the board if needed.
Raspberry Pi Zero 2 W Specifications
- Processor: Broadcom BCM2710A1, quad-core 64-bit SoC (Arm Cortex-A53 @ 1GHz)
- Memory: 512MB LPDDR2
- Connectivity:
– 2.4GHz IEEE 802.11b/g/n wireless LAN
– Bluetooth 4.2
– Bluetooth Low Energy (BLE)
– Integrated antenna
– 1 × USB 2.0 OTG interface
– 40-pin HAT-compatible I/O header footprint
– MicroSD card slot
– Mini HDMI port
– CSI-2 camera connector - Video:
– HDMI interface
– Composite video (via test pads) - Multimedia:
– H.264 decode
– MPEG-4 decode (1080p30)
– H.264 encode (1080p30)
– OpenGL ES 1.1, 2.0 graphics - Power input: 5V DC 2.5A
- Dimensions: 65mm × 30mm
- Operating temperature: -20°C to +70°C
- Production lifetime: The Raspberry Pi Zero 2 W will remain in production until at least January 2028
Raspberry Pi AVAILABLE!
5% discount for every reviewed order!
There are no reviews yet.