Strain gauge: 1 kg load cell
A strain gauge, or load cell, is a type of electronic sensor used to measure force or deformation. It consists of a flexible insulating backing and a metal foil element; consequently, when a force is applied, the resistance of the load cell changes and the object deforms along with the foil, generating a different electrical output. However, these foils are very thin and delicate, so they can easily be bent beyond their limits.
Load cells are ideal for projects where you need to measure pressure, force, weight and tension. However, this product is the load cell only; no ADC or converter is included in the pack – you’ll need to purchase these separately. Also, bear in mind that, as with all load cells, the sensor must be calibrated using known weights once installed.
To protect the float from damage and limit the amount of movement, Adafruit has bonded the sensor to a sturdy piece of aluminium using epoxy glue. To use this strain gauge, you must secure one side to your project’s enclosure or to a surface using the mounting holes. You can then apply the weight to the other side in the direction indicated, either by gravity (with the arrow pointing downwards) or by pulling (arrow pointing upwards). The output resistance will change with the amount of deflection and will be measured using a precision ADC or a Wheatstone bridge.
This is a 1 kg load cell, but we also have the 10 kg version available. Choose the one with at least twice the maximum force/weight you intend to apply to ensure maximum accuracy within the correct range.
- Product dimensions: 8 x 1.27 x 1.27 cm
- Product weight: 29 g
- Datasheet
Adafruit name: Strain Gauge Load Cell – 4 Wires – 1Kg [ADA4540]
























Reviews
There are no reviews yet.