Slow-response vibration switch (difficult to trigger)
This sensor is also referred to as the ‘poor man’s’ accelerometer or motion sensor! These spring-loaded vibration switches, or trigger switches, are triggered by non-directional vibrations and are highly sensitive. Inside, there is a very soft spring wound around a long metal pin. When the switch is moved, the spring touches the central pin and makes contact with it. Therefore, when there is movement, the two pins act as a closed switch. Conversely, when everything is stationary, the switch is open. This switch is ideal for basic or simple projects where you need to detect the presence of movement without the need to measure it.
We also have a version with a less stiff spring, which makes it a little easier to trigger, and a version with a very soft spring, which makes it much easier to trigger!
Electrical specifications of the slow-vibration switch
- Maximum voltage: 12V
- Contact resistance:<10 ohms
- Contact time: 2 ms
- Maximum current: 20 mA
- Insulation resistance: >>10M ohms
- Temperature range: -40 to 80ºC
- Operating life: 100,000 cycles
Product details:
- Diameter: 5 mm/0.2″
- Height (with pins): 21 mm/0.8″
- Height (without pins): 11 mm/0.4″
- Weight: 0.30 g
Adafruit name: Slow Vibration Sensor Switch (Hard to trigger) [ADA1767]
























Reviews
There are no reviews yet.